2017 July - New X-CCR Instructor Requirements

Logo iQsubiQsub Technologies s.r.o.

U Struzky 297
73514 Orlova
Czech Republic


A. Minimum requirements to become and remain an approved iQsub X-CCR Instructor:

1. Minimum 100 logged dives and 100 hours on X-CCR.
2. Have own complete X-CCR unit in factory condition (no modifications with non-original parts)
before the start of the training.
3. Active Advanced Nitrox Instructor with a recognizable training agency.
approved by iQsub Technologies (e.g. IANTD or TDI).
4. Hold a minimum of CCR Trimix level certification from a recognizable training agency accepted
by iQsub Technologies (e.g. IANTD, TDI, PSAI, RAID).


B. After 1-4 have been completed, complete the following to become an X-CCR Instructor:

Complete an instructor course with a factory approved X-CCR Instructor Trainer:
1. Assist with minimum of 1 full X-CCR diver course with approved X-CCR IT.
2. Conduct a minimum of 1 full X-CCR diver course under the supervision of approved X-CCR IT.
3. Agree to follow your agency’s standards (iQsub Technologies approved).
C. After the above have been completed, complete the following to REMAIN an X-CCR
Instructor:
1. Represent X-CCR as well as iQsub Technologies in a professional manner.
2. Notify iQsub Technologies privately and directly of any complaints with the X-CCR
3. Complete any remedial and/or continuing education the iQsub training department stipulates
within 60 days.
• iQsub Technologies reserves the right to approve or disapprove any instructor as factory
approved X-CCR Instructor at it’s sole discretion.
• No deviations from the above standards are allowed without prior written approval from iQsub
Technologies.
• These requirements do not guarantee or imply any training agency membership or status.


Revised 20.6.2017

Congratulations to Paolo G. who today concluded his iter for the CCR2 x-over with STDA, at Lake Garda. Diver of long experience on rebreathers including that of tester, in these months...
In the month of May are scheduled two dates for the course on Mnemonic Dive Planning for Recreational Diving: 17th and 24th of May. The course consists of 3 modules: the first describes the basics...
Congratulations to Laura and Alessio that in the week end ended their DPV Tech course. After the theory sessions followed the shallow water sessions and dives to put into practice everything...
24/05/2021-24/05/2021 Webinar, Mnemonic Dive Planning 18mt - R1 Open Water Diver

24/05/2021-24/05/2021 Webinar, Mnemonic Dive Planning 30mt - R2 Adv.O. W. Diver

01/05/2021-02/05/2021 Trento - Lake Garda, Recreational Instructor Course X-OVER

17/05/2021-17/05/2021 Webinar, Mnemonic Dive Planning 18mt - R1 Open Water Diver

20/04/2021-23/05/2021 Lago di Garda - Valstagna, Overhead Environment Fundamentals

08/05/2021-09/05/2021 Trento - Lago di Garda, EANx Miscele NITROX

06/05/2021-06/05/2021 Riva del garda, Workshop Assetto e Trim - Trim & buoyancy workshop

25/06/2021-27/06/2021 Riva del Garda, CCR 1

17/05/2021-17/05/2021 Webinar, Mnemonic Dive Planning - Full package 18-40mt

24/05/2021-24/05/2021 Webinar, Mnemonic Dive Planning - Full package 18-40mt

17/05/2021-17/05/2021 Webinar, Mnemonic Dive Planning 30mt - R2 Adv.O. W. Diver

08/05/2021-30/05/2021 Riva del Garda - Trento ITALY, Recreational Instructor Course
 
Blue Edge Srl
Via delle Ghiaie, 22
38122 Trento (TN) - Italy
t. +39 347 5041939
info@bluedge.it
P.IVA IT 02127010227
Copyright © 2021 Blue Edge Srl
Credits
 

Questo sito utilizza cookie tecnici e cookie di terze parti, necessari per la fruizione del servizio.

Read info